Surface Engineering - Application on Wear
Journal: Journal of Building Technology DOI: 10.32629/jbt.v5i1.1197
Abstract
In this article, engineering surface application is introduced as a new concept. The basis of this concept is the understanding that different surface technologies are applied to the design of existing engineering components, but, it is necessary to know that surface engineering would cover only part of the design of the component, the surface treatment to be applied should also be known. This is because, surfaces with a high index of hardening due to deformation, are resistant to severe adhesive wear, abrasion and pickling, but they should not have the same resistance to other types of wear. It means that a correlation must be established between the surface quality and the pickling resistance. In this article, it is shown that the use of high compatibility metallic materials is preferred and that a correlation can be established between the surface quality and the pickling resistance by a simple number. The selection of materials and methods of obtaining the engineering surfaces for tribological applications, depends to a large extent on the mechanism and particular type of predominant wear. Therefore, the selection of materials resistant to wear will be analyzed depending on the type of wear in question.
Keywords
tribology; wear resistance; design; surface treatment; pickling
Full Text
PDF - Viewed/Downloaded: 0 TimesReferences
[1] Ashby, M.F.; Jones, R.H.D.: Engineering Materials II: An Introduction to Properties, Applications and Design, Ed. Second Edition, Vol. 1, Elsevier Science, Department of Engineering, University of Cambridge, United Kingdom, 2012, ISBN: 0-08-096665-9.
[2] Blau, P.J.: Friction, Lubrication, and Wear Technology, ASM International: 175-235, 1992.
[3] Chowdhury, M.A.: Friction, Lubrication and Wear, Ed. BoD-Books on Demand, 2019, ISBN: 1-78984-287-5.
[4] Hebda, H.; Chichinadze, A.: Technical Manual of Tribology, Ed. Mashinoestroienie, Vol. 1, Moscow, Russia, Published in Russian, 1989.
[5] Hutchings, I.; Shipway, P.: Tribology: Friction and Wear of Engineering Materials, Ed. Butterworth-Heinemann, Department of Materials Science and Metallurgy, University of Cambridge, United Kingdom, 2017, ISBN: 0-08-100951-8.
[6] Kostetskii, B.I.: Friction, Lubrication and Wear in Machinery, Inst. Army Foreign Science and Technology Center, Charlottesville Va, 1972.
[7] Ludema, K.C.; Ajayi, O.O.: Friction, Wear, Lubrication: A Textbook in Tribology, Ed. CRC Press, 2018, ISBN: 0-429-44471-0.
[8] Martínez, F.: Integral Tribology, Ed. Editorial Noriega, Mexico, DF, 2010, ISBN: 978-607-05-0271-2.
[9] Martinez, P.F.: Integral Tribology, Ed. Limusa, Mexico, DF, 2011.
[10] Martínez, P.F.: Industrial Maintenance. Concepts and Applications, Ed. Editorial Cuba Azúcar, La Habana, Cuba, 2017, ISBN: 959-261-526-8.
[11] Rabinowicz, E.; Tanner, R.I.: Friction and Wear of Materials, Journal of Applied Mechanics, 33(2): 479, John Wiley, 1966.
[12] Ron, R.; Conway, J.J.M.: Friction and Wear of Sliding Bearings, Ed. Glacier Vandervills Inc, ASM Handbook, USA, 2002.
[13] Stolarski, T.: Tribology in Machine Design, Ed. Industrial Press Inc., USA, 1990, ISBN: 0-8311-1102-X.
[14] Totten, G.: Surface Modifications and Mechanisms, Ed. Marcel Dekker Inc, New York, USA, 2016, ISBN: 0-8247-4872-7.
[2] Blau, P.J.: Friction, Lubrication, and Wear Technology, ASM International: 175-235, 1992.
[3] Chowdhury, M.A.: Friction, Lubrication and Wear, Ed. BoD-Books on Demand, 2019, ISBN: 1-78984-287-5.
[4] Hebda, H.; Chichinadze, A.: Technical Manual of Tribology, Ed. Mashinoestroienie, Vol. 1, Moscow, Russia, Published in Russian, 1989.
[5] Hutchings, I.; Shipway, P.: Tribology: Friction and Wear of Engineering Materials, Ed. Butterworth-Heinemann, Department of Materials Science and Metallurgy, University of Cambridge, United Kingdom, 2017, ISBN: 0-08-100951-8.
[6] Kostetskii, B.I.: Friction, Lubrication and Wear in Machinery, Inst. Army Foreign Science and Technology Center, Charlottesville Va, 1972.
[7] Ludema, K.C.; Ajayi, O.O.: Friction, Wear, Lubrication: A Textbook in Tribology, Ed. CRC Press, 2018, ISBN: 0-429-44471-0.
[8] Martínez, F.: Integral Tribology, Ed. Editorial Noriega, Mexico, DF, 2010, ISBN: 978-607-05-0271-2.
[9] Martinez, P.F.: Integral Tribology, Ed. Limusa, Mexico, DF, 2011.
[10] Martínez, P.F.: Industrial Maintenance. Concepts and Applications, Ed. Editorial Cuba Azúcar, La Habana, Cuba, 2017, ISBN: 959-261-526-8.
[11] Rabinowicz, E.; Tanner, R.I.: Friction and Wear of Materials, Journal of Applied Mechanics, 33(2): 479, John Wiley, 1966.
[12] Ron, R.; Conway, J.J.M.: Friction and Wear of Sliding Bearings, Ed. Glacier Vandervills Inc, ASM Handbook, USA, 2002.
[13] Stolarski, T.: Tribology in Machine Design, Ed. Industrial Press Inc., USA, 1990, ISBN: 0-8311-1102-X.
[14] Totten, G.: Surface Modifications and Mechanisms, Ed. Marcel Dekker Inc, New York, USA, 2016, ISBN: 0-8247-4872-7.
Copyright © 2023 Francisco Martinez Pérez
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License