Research on Carbon Fiber Polymer Ultrafine Cement Grouting Material
Journal: Architecture Engineering and Science DOI: 10.32629/aes.v3i2.896
Abstract
With the gradual development of deep coal mining, the demand for roadway support strength is also increasing. For ordinary grouting materials, it cannot be injected into ultra-fine pores, and the tensile strength of its consolidated body is not high. Therefore, in this paper, ultra-fine cement and carbon fiber are used as the raw materials of the grouting fluid to increase the injectability of its fine pores and the tensile strength of the consolidated body. By designing experiments with different carbon fiber content, the grouting material with the best mix ratio was formulated. The test results show that: after the grouting material is mixed with graded sand to prepare a test block, the mechanical properties of the grouting material are optimal when the carbon fiber content is 1%, and the compressive strength is 17MPa and the tensile strength is 1.34MPa.
Keywords
underground engineering, grouting material, carbon fiber, superfine cement
Full Text
PDF - Viewed/Downloaded: 4 TimesReferences
[2] Shan PF, Lai XP. Influence of CT scanning parameters on rock and soil images. Journal of Visual Communication and Image Representation, 2019, 58: 642-650.
[3] Akhtar T, Ali B, Ben Kahla N, et al. Experimental investigation of eco-friendly high strength fiber-reinforced concrete developed with combined incorporation of tyre-steel fiber and fly ash. Construction and Building Materials, 2022, 314.
[4] Gao Z, Zhang P, Wang J, et al. Interfacial properties of geopolymer mortar and concrete substrate: Effect of polyvinyl alcohol fiber and nano-SiO2 contents. Construction and Building Materials, 2022, 315.
[5] Khan M, Cao M, Ai H, et al. Basalt Fibers in Modified Whisker Reinforced Cementitious Composites. Periodica Polytechnica-Civil Engineering, 2022.
[6] Akca K R, Ipek M. Effect of different fiber combinations and optimisation of an ultra-high performance concrete (UHPC) mix applicable in structural elements. Construction and Building Materials, 2022, 315.
[7] Murad Y, Abdel-Jabbar H. Shear behavior of RC beams prepared with basalt and polypropylene fibers. Case Studies in Construction Materials, 2022, 16.
[8] Avci E, Mollamahmutoglu M. Strength and Permeability Characteristics of Superfine Cement and Fine Fly Ash Mixture Grouted Sand. Aci Materials Journal, 2020, 117(6): 293-304.
[9] Zhang D, Ma Z, Zou Y, et al. Study on the Strength and Micro Characteristics of Grouted Specimens with Different Superfine Cement Contents. Materials, 2021, 14(21).
[10] Hao M, Li X, Wang X, et al. Experimental Study on Viscosity Characteristics of Expanding Polymer Grout. Journal of Wuhan University of Technology-Materials Science Edition, 2021, 36(2): 297-302.
[11] Mohammed A, Mahmood W, Ghafor K. TGA, rheological properties with maximum shear stress and compressive strength of cement-based grout modified with polycarboxylate polymers. Construction and Building Materials, 2020, 235.
Copyright © 2022 Dazhi Wu
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License