基于AI的柔直换流阀数字孪生应用关键技术探索

Journal: Advances in Computer and Autonomous Intelligence Research DOI: 10.32629/acair.v4i2.20393

高征宇

安世亚太科技股份有限公司上海第三分公司

Abstract

本文围绕柔直换流阀的应用场景,探索构建高置信度数字孪生系统,首先通过构建等 效模型作为标准数值,随后采用参数敏感度分析确定输入输出,依托神经网络模型实 现模型降阶,构建了反映子模块平均运行状态、可实现快速推演的数字孪生系统,支 撑了换流阀子模块的孪生分析、故障诊断等智能运维应用,实现了人工智能在电力能 源装备状态推演与智能运维中的新型应用,相关成果可供业内人员参考借鉴。

Keywords

柔直换流阀;深度神经网络;孪生系统

References

[1] 张磊,王健.基于PINN- POD混合模型的柔直换流阀数字孪生降阶方法[J].中国电机工程学报,2025,45(12):4123 -4132.
[2] 李娜,陈明,赵伟,等.特高压柔直换流阀数字孪生建模及AI故障诊断研究[J].电力系 统自动化,2024,48(18):134-142.
[3] 王浩,李娟,张鹏.基于LSTM- POD的柔直换流阀多物理场仿真降阶技术[J].电工技术学报,2024,39(7):1689-1700.
[4] 刘阳,周强,吴敏.数字孪生驱动的柔直换流阀全生命周期运维优化[J].高电压技术 ,2023,49(11):4012-4021.
[5] Xia J Y, Huang R Y, Li J P, et al. Digital twin-assisted fault diagnosis of rotating machinery without measured fault data[J].IEEE Transactions on Instrumentation and Measureme nt,2024,73:3531210.
[6] 陈曦,林宇,赵峰.基于AI的柔直换流阀数字孪生虚实映射精度优化研究[J].电力自 动化设备,2025,45(3):156-163.

Copyright © 2026 高征宇

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License