An Analysis of Smoke Management in High Rise Buildings

Journal: Architecture Engineering and Science DOI: 10.32629/aes.v3i1.656

Sahil Ali Khan1, Mohammad Arif Kamal2

1. Department of Architecture, Jamia Millia Islamia, New Delhi, India
2. Architecture Section, Aligarh Muslim University, Aligarh, India.

Abstract

The concept of the fire-resistant building is promptly discussed while designing and incorporation mechanical systems into the building, while smoke management is deeply forgotten in the initial stages and even in later stages of equipment installation. Although, it is a well-established fact that smoke is more dangerous to life and life-taking than a fire during a fire in a building. In this study, active and passive methods like a smoke purge, pressurization control, smoke reservoirs, etc. of creating a building smoke proof are discussed. Also, factors influencing these active and passive measures like buoyancy, stack effect, etc. are discussed, and how to calculate the implication of these factors are assessed. The design guideline from different codes like NFPA 92, NFPA 92A, NZBC C3/AS 1530.4, BS 476 part 24, ISO 5925/1, design of smoke management systems for buildings published by ASHRAE, are reviewed for smoke management, and analysis of most relevant and new research in the field of smoke management systems that demonstrates significant evolution in the field. The idea of the smoke-resistant building can be easily achieved if incorporated in the early stages of design, even if applied with proper technique and equipment can also be achieved in later stages.

Keywords

smoke management, smoke purge, pressurization control, buoyancy, stack effect

References

[1]Chow, W. K., & Chow, C. L. (2005). Evacuation with smoke control for atria in green and sustainable buildings. Building and Environment, 40(2), 195–200. https://doi.org/10.1016/j.buildenv.2004.07.008
[2]Courtier, G. A. C., & Wild, J. A. (1991). The development of axial flow fans for the venting of hot fire smoke. Fire Technology, 27(3), 250–265. https://doi.org/10.1007/BF01038450
[3]Ferreira, M. J., & Strege, S. M. (2005). Smoke management systems. https://doi.org/10.6028/NIST.NCSTAR.1-4d
[4]FRN-1001. (n.d.).
[5]Harrison, R., & Spearpoint, M. J. (2006). Smoke management issues in buildings with large enclosures. https://ir.canterbury.ac.nz/handle/10092/117
[6]Hilditch, R. (2017). Smoke management for modern infrastructure. Undefined.
[7]Huang, Y., Zhou, X., Cao, B., & Yang, L. (2020). Computational fluid dynamics-assisted smoke control system design for solving fire uncertainty in buildings. Indoor and Built Environment, 29(1), 40–53. https://doi.org/10.1177/1420326X19842370
[8]Hurley, M. J. (n.d.). SFPE Handbook of Fire Protection Engineering Editor-in-Chief Fifth Edition.
[9]Kamal, M. A and Khan, S. A. (2021). Variable Refrigerant Flow in Air Conditioning of Buildings: System Configuration and Energy Efficiency. American Journal of Civil Engineering and Architecture, 9(2), 42–51. https://doi.org/10.12691/ajcea-9-2-1
[10]Klote, J. H. (2016). Smoke control. In SFPE Handbook of Fire Protection Engineering, Fifth Edition (pp. 1785–1823). Springer New York. https://doi.org/10.1007/978-1-4939-2565-0_50
[11]Klote, J. H., & Klote, J. (2012). ABOUT THE AUTHORS. www.ashrae.org
[12]Klote, J. H., Milke, J. A. (James A. ), American Society of Heating, R. and A.-C. Engineers., & Society of Fire Protection Engineers. (2002). Principles of smoke management. 377.
[13]Król, M. (2011). Review of Smoke Management in Atrium. Undefined.
[14]Kulkarni, S. S., & Agashe, S. D. (2016). Study of Intelligent Evacuation Systems of High-Rise Buildings in India-a review. Undefined, 190–194. https://doi.org/10.1109/CAST.2016.7914964
[15]Li, M., Gao, Z., Ji, J., & Li, K. (2018). Modeling of positive pressure ventilation to prevent smoke spreading in sprinklered high-rise buildings. Fire Safety Journal, 95, 87–100. https://doi.org/10.1016/j.firesaf.2017.11.004
[16]Lougheed, G. (2001). Considerations in the Design of Smoke Management Systems for Atriums.
[17]NFPA ® 92 Standard for Smoke Control Systems Handbook 2012. (n.d.). Retrieved January 13, 2022, from www.edufire.ir
[18]NFPA ® 92A. (n.d.). www.edufire.ir
[19]Poh, W., & Airah, M. (n.d.). Tenability criteria for design of smoke hazard management systems.
[20]Rabia, Samir. (n.d.). Fire resisting ductwork tested to BS476 Part 24 3 rd Edition (Volume 3 of 3 – rules for assessments. Retrieved January 13, 2022, from
[21]Tamura, G. T., & Shaw, C. Y. (1973). Basis for the Design of Smoke Shafts.

Copyright © 2022 Sahil Ali Khan, Mohammad Arif Kamal

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License